View BFC238330224_6729958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 187 ac and pulse double metallized polypropylene film capacitors mmkp radial potted type mmkp 383 vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 applications where steep pulses occur e.g. smps (switch mode power supplies). electronic lighting e.g. ballast. motor control circuits. s-correction. for flyback applications please use 1400 v series. reference specifications iec 60384-17 marking c-value; tolerance; rated volt age; sub-class; manufacturer?s type; code for dielectric material; code for factory of origin; manufacturer; year and week of manufacture dielectric polypropylene film electrodes metallized encapsulation flame retardant plastic case and epoxy resin construction internal serial construction rated (dc) voltage 250 v, 400 v, 630 v, 1000 v, 1400 v, 1600 v, 2000 v, 2500 v rated (ac) voltage 125 v, 200 v, 220 v, 350 v, 500 v, 550 v, 700 v, 900 v rated peak-to-peak voltage 350 v, 560 v, 630 v, 1000 v, 1400 v, 1600 v, 2000 v, 2500 v features 7.5 mm bent back pitch. 15 mm to 27.5 mm lead pitch. low contact resistance. low loss dielectric. small dimensions for high density packaging. supplied loose in box and taped on reel material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 encapsulation plastic case, epoxy resin sealed, flame retardant ul-class 94 v-0 climatic category 55/105/56 capacitance range (e24 series) 0.001 f to 2.7 f capacitance tolerance 5 % leads tinned wire rated (dc) temperature 85 c rated (ac) temperature 105 c maximum application temperature 105 ? c detail specification for more detailed data and test requirements contact: dc-film@vishay.com 16 8 x12(halfpage) 1 6 8 x 1 2 ( h a l f p a g e ) w d t l p h l t l h h' w d t h f 10 f' (1) 15 dimensions in mm (1) ? f-f? ?? 0.3 mm f = 7.5 + 0.6/- 0.1 mm
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 188 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 composition of catalog number note (1) for detailed tape specifications refer to ?packaging information? www. vishay.com/doc?28139 or end of catalog specific reference data (250 vdc) (1) old ordering code bfc2 383 xx yy y 2222 (1) 383 xx yy y type and pitches 383 15.0 mm/7.5 mm 15.0 mm 22.5 mm 27.5 mm type packaging lead configuration preferred types c-tol. 250 v 400 v 630 v 1000 v 1400 v 1600 v 2000 v 2500 v 383 loose in box lead length 3.5 mm 0.3 mm 5 % 00 10 20 30 40 50 60 70 taped on reel (bent back to 7.5 mm) (1) h ? 16.0 mm; p 0 ? 15.0 mm reel diameter ? 500 mm ? 5 % 03 13 23 33 43 53 63 - dimensions of this code numbers stay between brackets on request 383 loose in box lead length 5.0 mm 1.0 mm ? 5 % 01 11 21 31 41 51 61 71 lead length 25.0 mm 2.0 mm ? 5 % 04 14 24 34 44 54 64 74 taped on reel (1) h ? 18.5 mm; p 0 ? 12.7 mm ? 5 % 02 12 22 32 42 52 62 72 taped on reel (bent back to 7.5 mm) (1) h ? 16.0 mm; p 0 ? 15.0 mm reel diameter ? 356 mm ? 5 % 05 15 25 35 45 55 65 - dimensions of this code numbers stay between brackets taped on reel (bent back to 10.0 mm) (1) h ? 16.0 mm; p 0 ? 15.0 mm reel diameter ? 500 mm ? 5 % 08 18 28 38 48 58 68 - multiplier (nf) 0.1 2 13 10 4 100 5 capacitance (numerically) example: 104 ? 10 x 10 ? 100 nf description value tangent of loss angle: at 10 khz at 100 khz c ? 0.15 f ?? 5 x 10 -4 ? 20 x 10 -4 0.15 f ? c ? 0.39 f ?? 5 x 10 -4 ? 25 x 10 -4 0.39 f ? c ? 0.56 f ?? 10 x 10 -4 ?? 25 x 10 -4 0.56 f ? c ? 0.82 f ?? 10 x 10 -4 ? 40 x 10 -4 0.82 f ? c ? 1.2 f ?? 10 x 10 -4 ?? 50 x 10 -4 1.2 f ? c ? 1.8 f ?? 10 x 10 -4 ?? 65 x 10 -4 1.8 f ? c ? 2.2 f ?? 15 x 10 -4 ?? 75 x 10 -4 2.2 f ? c ? 2.7 f ?? 15 x 10 -4 ? 85 x 10 -4 rated voltage pulse slope (du/d t )r: c ? 0.15 f 450 v/s 0.15 f ? c ? 0.39 f 900 v/s 0.39 f ? c ? 0.82 f 290 v/s 0.82 f ? c ? 2f 190 v/s 2f ? c ? 2.7 f 130 v/s r between leads, for c ? 1f at 100v, 1min ?? 100 000 m ? rc between leads, for c ? 1f at 100v, 1min ?? 100 000 s r between leads and case, 100 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 50 pc peak discharge ?? 220 v withstanding (dc) voltage (cut off curr ent 10 ma), rise time 100 v/s 400 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 189 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 250 v; u rac = 125 v; u pp = 350 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity u rdc = 250 v; u rac = 125 v; u pp = 350 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.082 5.0 x 11.0 (13.0) x 17.5 1.1 00? (1250) 04? (1000) 02? (1100) 03? (950) 05? (550) 823 0.091 913 0.1 104 0.11 6.0 x 12.0 (14.0) x 17.5 1.4 00? (1000) 04? (1000) 02? (900) 03? (800) 05? (450) 114 0.12 124 0.13 134 0.15 154 0.16 7.0 x 13.5 (15.5) x 17.5 1.8 00? (750) 04? (500) 02? (800) 03? (700) 05? (400) 164 0.18 184 0.2 204 0.22 8.5 x 15.0 (17.0) x 17.5 2.6 00? (750) 04? (500) 02? (650) 03? (550) 05? (300) 224 0.24 244 0.27 274 0.3 304 0.33 10.0 x 16.5 (18.5) x 17.5 3.3 00? (500) 04? (450) 02? (600) 03? (500) 05? (250) 334 0.36 364 0.39 394 c (f) dimensions w xh xl (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch ..yyy xx (spq) xx (spq) xx (spq) pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.43 7.0 x 116.5 x 26.0 3.0 00? (200) 04? (250) 02? (550) 434 0.47 8.5 x 18.0 x 26.0 4.2 00? (200) 04? (250) 02? (450) 474 0.51 514 0.56 564 0.62 624 0.68 10.0 x 19.5 x 26.0 5.3 00? (200) 04? (200) 02? (350) 684 0.75 754 0.82 824 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.91 11.0 x 21.0 x 31.0 8.0 00? (750) 04? (125) - 914 1.0 105 1.1 115 1.2 125 1.3 13.0 x 23.0 x 31.0 9.7 00? (500) 04? (125) 135 1.5 155 1.6 165 1.8 15.0 x 25.0 x 31.0 12.6 00? (100) 04? (125) 185 2.0 205 2.2 16.3 00? (100) 04? (100) 225 2.4 18.0 x 28.0 x 31.0 245 2.7 275
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 190 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 specific reference data (400 vdc) u rdc = 400 v; u rac = 200 v; u pp = 560 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity description value tangent of loss angle: at 10 khz at 100 khz c ? 0.22 f ?? 5 x 10 -4 ?? 20 x 10 -4 0.22 f ? c ? 0.33 f ? 10 x 10 -4 ?? 35 x 10 -4 0.33 f ? c ? 0.43 f ? 10 x 10 -4 ? 40 x 10 -4 0.43 f ? c ? 0.68 f ? 10 x 10 -4 ?? 50 x 10 -4 0.68 f ? c ? 0.82 f ? 10 x 10 -4 ?? 55 x 10 -4 0.82 f ? c ? 1.2 f ? 10 x 10 -4 ? 60 x 10 ? 4 1.2 f ? c ? 1.5 f ?? 10 x 10 -4 ? 65 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.082 f 600 v/s 0.082 f ? c ? 0.22 f 1200 v/s 0.22 f ? c ? 0.43 f 410 v/s 0.42 f ? c ? 1.1 f 260 v/s 1.1 f ? c ? 1.5 f 180 v/s r between leads, for c ? 1f at 100v, 1min ?? 100 000 m ? rc between leads, for c ? 1f at 100v, 1min ?? 100 000 s r between leads and case, 100 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 50 pc peak discharge ? 220 v withstanding (dc) voltage (cut off curr ent 10 ma), rise time 100 v/s 560 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum aplication temperature 105 c c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.047 5.0 x 11.0 (13.0) x 17.5 1.1 10? (1250) 14? (1000) 12? (1100) 13? (950) 15? (550) 473 0.051 513 0.056 563 0.062 6.0 x 12.0 (14.0) x 17.5 1.4 10? (1000) 14? (1000) 12? (900) 13? (800) 15? (450) 623 0.068 683 0.075 753 0.082 823 0.091 7.0 x 13.5 (15.5) x 17.5 1.8 10? (750) 14? (500) 12? (800) 13? (700) 15? (400) 913 0.1 104 0.11 114 0.12 8.5 x 15.0 (17.0) x 17.5 2.5 10? (750) 14? (500) 12? (650) 13? (550) 15? (300) 124 0.13 134 0.15 154 0.16 164 0.18 10.0 x 16.5 (18.5) x 17.5 3.3 10? (500) 14? (450) 12? (600) 13? (500) 15? (250) 184 0.2 204 0.22 224
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 191 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 400 v; u rac = 200 ; u p-p = 560 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity specific reference data (630 vdc) c (f) dimensions w x h x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch ..yyy xx (spq) xx (spq) xx (spq) pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.24 7.0 x 116.5 x 26.0 3.0 10? (200) 14? (250) 12? (550) 244 0.27 8.5 x 18.0 x 26.0 4.2 10? (200) 14? (250) 12? (450) 274 0.30 304 0.33 334 0.36 10.0 x 19.5 x 26.0 5.3 10? (200) 14? (200) 12? (350) 364 0.39 394 0.43 434 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.47 11.0 x 21.0 x 31.0 8.0 10? (100) 14? (125) 474 0.51 514 0.56 - 564 0.62 624 0.68 13.0 x 23.0 x 31.0 9.7 10? (100) 14? (125) 684 0.75 754 0.82 824 0.91 15.0 x 25.0 x 31.0 12.6 10? (100) 14? (125) 914 1. - 105 1.1 115 1.2 18.0 x 28.0 x 31.0 10? (100) 14? (100) 125 1.3 16.3 135 1.5 155 description value tangent of loss angle: at 10 khz at 100 khz c ? 0.15 f ?? 5 x 10 -4 ?? 15 x 10 -4 0.15 f ? c ? 0.22 f ? 8x10 -4 ?? 25 x 10 -4 0.22 f ? c ? 0.3 f ? 8x10 -4 ? 30 x 10 -4 0.3 f ? c ? 0.47 f ? 10 x 10 -4 ?? 40 x 10 -4 0.47 f ? c ? 0.68 f ? 10 x 10 -4 ?? 45 x 10 -4 0.68 f ? c ? 1.0 f ? 10 x 10 -4 ?? 50 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.056 f 700 v/s 0.056 f ? c ? 0.15 f 1400 v/s 0.15 f ? c ? 0.3 f 470 v/s 0.3 f ? c ? 0.75 f 300 v/s 0.75 f ? c ? 1.0 f 210 v/s r between leads, for c ? 1 f at 100 v, 1 min ?? 100 000 m ? r between leads and case, 100 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 50 pc peak discharge ? 250 v withstanding (dc) voltage (cut off current 10 ma), rise time 100 v/s 1000 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 192 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 630 v; u rac = 220 v; u p-p = 630 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.03 5.0 x 11.0 (13.0) x 17.5 1.1 20? (1250) 24? (1000) 22? (2200) 23? (950) 25? (550) 303 0.033 333 0.036 363 0.039 6.0 x 12.0 (14.0) x 17.5 1.4 20? (1000) 24? (1000) 22? (900) 23? (800) 25? (450) 393 0.043 433 0.047 473 0.051 513 0.056 563 0.062 7.0 x 13.5 (15.5) x 17.5 1.8 20? (750) 24? (500) 22? (800) 23? (700) 25? (400) 623 0.068 683 0.075 753 0.082 8.5 x 15.0 (17.0) x 17.5 2.5 20? (750) 24? (500) 22? (650) 23? (550) 25? (300) 823 0.091 913 0.1 104 0.11 114 0.12 10.0 x 16.5 (18.5) x 17.5 3.3 20? (500) 24? (450) 22? (600) 23? (500) 25? (250) 124 0.13 134 0.15 154 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.16 8.5 x 18.0 x 26.0 4.2 20? (200) 24? (250) 22? (450) -- 164 0.18 184 0.2 204 0.22 224 0.24 10.0 x 19.5 x 26.0 5.3 20? (200) 24? (200) 22? (350) -- 174 0.27 304 0.3 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.33 11.0 x 21.0 x 31.0 8.0 20? (750) 24? (125) - 334 0.36 364 0.39 394 0.43 434 0.47 13.0 x 23.0 x 31.0 9.7 20? (500) 24? (125) 474 0.51 514 0.56 564 0.62 15.0 x 25.0 x 31.0 12.6 20? (100) 24? (125) 624 0.68 684 0.75 754 0.82 18.0 x 28.0 x 31.0 16.3 20? (100) 24? (100) 824 0.91 914 1.0 105
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 193 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 specific reference data (1000 vdc) u rdc = 1000 v; u rac = 350 v; u p-p = 1000 v; c-tol. = 5 % description value tangent of loss angle: at 10 khz at 100 khz c ? 0.062 f ?? 5 x 10 -4 ?? 15 x 10 -4 0.062 f ? c ? 0.13 f ? 6x10 -4 ?? 20 x 10 -4 0.13 f ? c ? 0.22 f ? 8x10 -4 ? 25 x 10 -4 0.22 f ? c ? 0.33 f ? 8x10 -4 ?? 30 x 10 -4 0.33 f ? c ? 0.47 f ? 8 x 10 -4 ?? 35 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.024 f 1700 v/s 0.024 f ? c ? 0.062 f 3300 v/s 0.062 f ? c ? 0.13 f 1200 v/s 0.13 f ? c ? 0.33 f 700 v/s 0.33 f ? c ? 0.47 f 470 v/s r between leads, for c ? 1 f at 500 v, 1 min ?? 100 000 m ? r between leads and case, 500 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 50 pc peak discharge ? 440 v withstanding (dc) voltage (cut off current 10 ma), rise time 100 v/s 1600 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.0043 5.0 x 11.0 (13.0) x 17.5 1.1 30? (1250) 34? (1000) 32? (1100) 33? (950) 35? (550) 432 0.0047 472 0.0051 512 0.0056 562 0.0062 622 0.0068 682 0.0075 752 0.0082 822 0.0091 912 0.01 103 0.011 113 0.012 123 0.013 133 0.015 153 0.016 163 0.018 6.0 x 12.0 (14.0) x 17.5 1.4 30? (1000) 34? (1000) 32? (900) 33? (800) 35? (450) 183 0.02 203 0.022 223 0.024 243 0.027 7.0 x 13.5 (15.5) x 17.5 1.8 30? (750) 34? (500) 32? (800) 33? (700) 35? (400) 273 0.030 303 0.033 333 0.036 8.5 x 15.0 (17.0) x 17.5 2.5 30? (750) 34? (500) 32? (650) 33? (550) 35? (300) 363 0.039 393 0.043 433 0.047 473 0.051 10.0 x 16.5 (18.5) x 17.5 3.3 30? (500) 34? (450) 32? (600) 33? (500) 35? (250) 513 0.056 563 0.062 623 notes (1) net weight for short lead products only ? spq = standard packaging quantity
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 194 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 notes (1) net weight for short lead products only ? spq = standard packaging quantity specific reference data (1400 vdc) c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads leads original pitch ..yyy xx (spq) xx (spq) xx (spq) pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch 22.5 mm 0.068 7.0 x 16.5 x 26.5 3.0 30 ... (200) 34? (250) 32? (550) 683 0.075 8.5 x 18.0 x 26.0 4.2 30? (200) 34? (250) 32? (450) 753 0.082 823 0.091 913 0.1 10.0 x 19.5 x 26.0 5.3 30? (200) 34? (200) 32? (350) 104 0.11 114 0.12 124 0.13 134 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.15 11.0 x 21.0 x 31.0 8.0 30? (100) 34? (125) - 154 0.16 164 0.18 184 0.2 13.0 x 23.0 x 31.0 9.7 30? (100) 34? (125) 204 0.22 224 0.24 244 0.27 15.0 x 25.0 x 31.0 12.6 30? (100) 34? (125) 274 0.3 304 0.33 334 0.36 18.0 x 28.0 x 31.0 16.3 30? (100) 34? (100) 364 0.39 394 0.43 434 0.47 474 description value tangent of loss angle: at 10 khz at 100 khz c ? 0.016 f ?? 5 x 10 -4 ?? 10 x 10 -4 0.016 f ? c ? 0.039 f ? 5x10 -4 ?? 15 x 10 -4 0.039 f ? c ? 0.13 f ? 5x10 -4 ? 20 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.0056 f 8000 v/s 0.0056 f ? c ? 0.016 f 15 000 v/s 0.016 f ? c ? 0.039 f 4000 v/s 0.039 f ? c ? 0.1 f 2100 v/s 0.1 f ? c ? 0.13 f 1500 v/s r between leads, for c ? 1f at 500v, 1min ?? 100 000 m ? r between leads and case, 500 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 20 pc peak discharge ? 500 v withstanding (dc) voltage (cut off curr ent 10 ma), rise time 100 v/s 2250 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 195 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 1400 v; u rac = 500 v; u p-p = 1400 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.0022 5.0 x 11.0 (13.0) x 17.5 40? (1250) 44? (1000) 42? (1100) 43? (950) 45? (550) 222 0.0024 242 0.0027 272 0.003 1.1 302 0.0033 332 0.0036 362 0.0039 392 0.0043 6.0 x 12.0 (14.0) x 17.5 1.4 40? (1000) 44? (1000) 42? (900) 43? (800) 45? (450) 432 0.0047 472 0.0051 512 0.0056 562 0.0062 7.0 x 13.5 (15.5) x 17.5 1.8 40? (750) 44? (500) 42? (800) 43? (700) 45? (400) 622 0.0068 682 0.0075 752 0.0082 822 0.0091 8.5 x 15.0 (17.0) x 17.5 2.5 40? (750) 44? (500) 42? (650) 43? (550) 45? (300) 912 0.01 103 0.011 113 0.012 123 0.013 10.0 x 16.5 (18.5) x 17.5 3.3 40? (500) 44? (450) 42? (600) 43? (500) 45? (250) 133 0.015 153 0.016 163 pitch = 22.5 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.018 7.0 x 16.5 x 26.0 3 40? (200) 44? (250) 42? (550) -- 183 0.02 203 0.022 8.5 x 18.0 x 26.0 4.2 40? (200) 44? (250) 42? (450) -- 223 0.024 243 0.027 273 0.03 10.0 x 19.5 x 26.0 5.3 40? (200) 44? (200) 42? (350) -- 303 0.033 333 0.036 363 0.039 393 pitch = 27.5 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.043 11.0 x 21.0 x 31.0 8 - 433 0.047 40? 44? 473 0.051 513 0.056 563 0.062 13.0 x 23.0 x 31.0 9.7 40? (100) 44? (125) 623 0.068 683 0.075 753 0.082 15.0 x 25.0 x 31.0 12.6 40? (100) 44? (125) 823 0.091 913 0.1 104 0.11 18.0 x 28.0 x 31.0 16.3 40? (100) 44? (100) 114 0.12 124 0.13 134
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 196 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 specific reference data (1600 vdc) u rdc = 1600 v; u rac = 550 v; u p-p = 1600 v; c-tol. = 5 % description value tangent of loss angle: at 10 khz at 100 khz c ? 0.015 f ?? 5 x 10 -4 ?? 15 x 10 -4 0.015 f ? c ? 0.15 f ? 5x10 -4 ?? 20 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.0056 f 8000 v/s 0.0056 f ? c ? 0.0075 f 15 000 v/s 0.0075 f ? c ? 0.039 f 3100 v/s 0.039 f ? c ? 0.1 f 1800 v/s 0.1 f ? c ? 0.15 f 1200 v/s r between leads, for c ? 1f at 500v, 1min ?? 100 000 m ? r between leads and case, 500 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 20 pc peak discharge ? 660 v withstanding (dc) voltage (cut off curr ent 10 ma), rise time 100 v/s 2560 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum aplication temperature 105 c c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 leads 25.0 2.0 original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.0027 5.0 x 11.0 (13.0) x 17.5 1.1 50? (1250) 54? (1000) 52? (1100) 53? (950) 55? (550) 272 0.003 302 0.0033 332 0.0036 362 0.0039 392 0.0043 6.0 x 12.0 (14.0) x 17.5 1.4 50? (1000) 54? (1000) 52? (900) 53? (800) 55? (450) 432 0.0047 472 0.0051 512 0.0056 562 0.0062 7.0 x 13.5 (15.5) x 17.5 1.8 50? (750) 54? (500) 52? (800) 53? (700) 55? (400) 622 0.0068 682 0.0075 752 0.0082 8.5 x 15.0 (17.0) x 17.5 2.5 50? (750) 54? (500) 52? (650) 53? (550) 55? (300) 822 0.0091 912 0.01 103 0.011 113 0.012 10.0 x 16.5 (18.5) x 17.5 3.3 50? (500) 54? (450) 52? (600) 53? (500) 55? (250) 123 0.013 133 0.015 153 pitch = 22.5 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.016 7.0 x 16.5 x 26.0 3.0 50? (200) 54? (250) 52? (550) -- 163 0.018 183 0.02 203 0.022 8.5 x 18.0 x 26.0 4.2 50? (200) 54? (250) 52? (450) -- 223 0.024 243 0.027 273 0.03 303 0.033 10.0 x 19.5 x 26.0 5.3 50? (200) 54? (200) 52? (350) -- 333 0.036 363 0.039 393 notes (1) net weight for short lead products only ? spq = standard packaging quantity
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 197 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 notes (1) net weight for short lead products only ? spq = standard packaging quantity specific reference data (2000 vdc) u rdc = 1600 v; u rac = 550 v; u p-p = 1600 v; c-tol. = 5 % c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 leads 25.0 2.0 original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 27.5 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.043 11.0 x 21.0 x 31.0 8 50? (100) 54? (125) - 433 0.047 473 0.051 513 0.056 563 0.062 13.0 x 23.0 x 31.0 9.7 50? (100) 54? (125) 623 0.068 683 0.075 753 0.082 15.0 x 25.0 x 31.0 12.6 50? (100) 54? (125) 823 0.091 913 0.1 104 0.11 18.0 x 28.0 x 31.0 16.3 50? (100) 54? (100) 114 0.12 124 0.13 134 0.15 154 description value tangent of loss angle: at 10 khz at 100 khz c ? 0.01 f ?? 5 x 10 -4 ?? 15 x 10 -4 0.01 f ? c ? 0.1 f ? 10 x 10 -4 ?? 18 x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.0036 f 11 000 v/s 0.0036 f ? c ? 0.01 f 20 000 v/s 0.01 f ? c ? 0.024 f 4400 v/s 0.024 f ? c ? 0.068 f 2500 v/s 0.068 f ? c ? 0.1 f 1800 v/s r between leads, for c ? 1 f at 500 v, 1 min ?? 100 000 m ? r between leads and case, 500 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 20 pc peak discharge ? 750 v withstanding (dc) voltage (cut off current 10 ma), rise time 100 v/s 3200 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 198 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 2000 v; u rac = 700 v; u p-p = 2000 v; c-tol. = 5 % notes (1) net weight for s hort lead products only ? spq = standard packaging quantity c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 leads 25.0 2.0 original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 15 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 15 mm pitch = 7.5 mm (bent back) 0.001 5.0 x 11.0 (13.0) x 17.5 1.1 60? (1250) 64? (1000) 62? (1100) 63? (950) 65? (550) 102 0.0011 112 0.0012 122 0.0013 132 0.0015 152 0.0016 162 0.0018 182 0.002 202 0.0022 222 0.0024 242 0.0027 6.0 x 12.0 (14.0) x 17.5 1.4 60? (1000) 64? (1000) 62? (900) 63? (800) 65? (450) 272 0.003 302 0.0033 332 0.0036 362 0.0039 7.0 x 13.5 (15.5) x 17.5 1.8 60? (750) 64? (500) 62? (800) 63? (700) 65? (400) 392 0.0043 432 0.0047 472 0.0051 8.5 x 15.0 (17.0) x 17.5 2.5 60? (750) 64? (500) 62? (650) 63? (550) 65? (300) 512 0.0056 562 0.0062 622 0.0068 682 0.0075 10.0 x 16.5 (18.5) x 17.5 3.3 60? (500) 64? (450) 62? (600) 63? (500) 65? (250) 752 0.0082 822 0.0091 912 0.01 103 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 22.5 mm 0.011 7.0 x 16.5 x 26.0 3.0 60? (200) 64? (250) 62? (550) 113 0.012 -- 123 0.013 133 0.015 8.5 x 18.0 x 26.0 4.2 60? (200) 64? (250) 62? (450) 153 0.016 -- 163 0.018 183 0.02 10.0 x 19.5 x 26.0 5.3 60? (200) 64? (200) 62? (350) 203 0.022 -- 223 0.024 243 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.027 11.0 x 21.0 x 31.0 8.0 60? (100) 64? (125) - 273 0.03 303 0.033 333 0.036 363 0.039 393
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 199 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 notes (1) net weight for short lead products only ? spq = standard packaging quantity specific reference data (2500 vdc) c (f) dimensions w x h (h?) x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 leads 25.0 2.0 original pitch pitch = 7.5 mm (bent back) ..yyy ? 500 mm ? 356 mm xx (spq) xx (spq) xx (spq) xx (spq) xx (spq) pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm pitch = 27.5 mm 0.043 13.0 x 23.0 x 31.0 9.7 60? (100) 64? (125) - 433 0.047 473 0.051 513 0.056 15.0 x 25.0 x 31.0 12.6 60? (100) 64? (125) 563 0.062 623 0.068 683 0.075 18.0 x 28.0 x 31.0 16.3 60? (100) 64? (100) 753 0.082 823 0.091 913 0.10 104 description value tangent of loss angle: at 10 khz at 100 khz c ? 0.015 f ?? 5 x 10 -4 ?? 10 x 10 -4 0.015 f ? c ? 0.056 f ? 5x10 -4 ?? 15x 10 -4 rated voltage pulse slope (du/dt) r : c ? 0.015 f 13 000 v/s 0.015 f ? c ? 0.043 f 6000 v/s 0.043 f ? c ? 0.056 f 4200 v/s r between leads, for c ? 1 f at 500 v, 1 min ?? 100 000 m ? r between leads and case, 500 v, 1 min ?? 30 000 m ? ionization (ac) voltage (typical value) at 20 pc peak discharge ? 1000 v withstanding (dc) voltage (cut off current 10 ma), rise time 100 v/s 3500 v, 1 min withstanding (dc) voltage between leads and case 2840 v, 1 min maximum application temperature 105 c
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 200 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 u rdc = 2500 v; u rac = 900 v; u p=p = 2500 v; c-tol. = 5 % notes (1) net weight for short lead products only ? spq = standard packaging quantity c (f) dimensions w x h x l (mm) mass (g) (1) catalog number bfc2 383 xxyyy and packaging loose in box reel c-value leads 3.5 0.3 mm leads 25.0 2.0 mm h = 18.5 mm ..yyy xx (spq) xx (spq) xx (spq) pitch = 22.5 mm 0.4 mm; d t =0.80mm 0.08mm 0.001 6.0 x 15.5 x 26.0 2.4 70? (200) 74? (250) 72? (600) 102 0.0011 112 0.0012 122 0.0013 132 0.0015 152 0.0016 162 0.0018 182 0.002 202 0.0022 222 0.0024 242 0.0027 272 0.003 302 0.0033 332 0.0036 362 0.0039 392 0.0043 432 0.0047 472 0.0051 512 0.0056 7.0 x 16.5 x 26.0 3.0 70? (200) 74? (250) 72? (550) 562 0.0062 622 0.0068 682 0.0075 752 0.0082 8.5 x 18.0 x 26.0 4.2 70? (200) 74? (250) 72? (450) 822 0.0091 912 0.01 103 0.011 113 0.012 10.0 x 19.5 x 26.0 5.3 70? (200) 74? (200) 72? (350) 123 0.013 133 0.015 153 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm 0.016 9.0 x 19.0 x 31.0 5.9 70? 74? - 163 0.018 11.0 x 21.0 x 31.0 8.0 70? (100) 74? (125) 183 0.02 203 0.022 223 0.024 243 0.027 13.0 x 23.0 x 31.0 9.7 70? (100) 74? (125) 273 0.03 303 0.033 333 0.036 15.0 x 25.0 x 31.0 12.6 70? (100) 74? (125) 363 0.039 393 0.043 433 0.047 18.0 x 28.0 x 31.0 16.3 70? (100) 74? (100) 473 0.051 513 0.056 563
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 201 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 mounting normal use the capacitors are designed for mounting on printed-circuit boards. the capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines . for detailed tape specifications refer to ?packaging information? www.vishay.com/docs?28139 specific method of mounting to withstand vibration and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: ? for original pitch ?? 15 mm ? the capacitors shall be mechanically fixed by the leads ? for larger pitches the capacitors shall be mounted in the same way and the body clamped space requirements on printed-circuit board the maximum length and width of film capacitors is shown in the drawing: ? eccentricity as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned ? product height with seating plane as given by ?iec 60717? as reference: h max. ? h + 0.3 mm storage temperature ? storage temperature: t stg = - 25 c to + 40 c with rh maximum 80 % without condensation ratings and characterist ics reference conditions unless otherwise specified, all electrical values apply to an ambi ent free temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. eccentricity i max. = i + 0.3 mm b max. = b + 0.3 mm
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 202 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 characteristics capacitance as a function of ambi ent temperature (typical curve) (1 khz) impedance as a function of frequency (typical curve) max. dc and ac voltage as function of temperature max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency typical 1 khz - 60 c/c ( % ) 4 0 - 2 - 4 - 6 2 - 20 20 60 100 t am b (c) min. max. 2.2 f 1.0 f 100 nf 10 nf 1.0 nf impedance ( ) 10 2 10 1 10 0 10 -1 10 -2 10 -3 f (hz) 10 4 10 5 10 6 10 7 10 8 factor t am b (c) 1.0 0. 8 0.6 0.4 0.0 0.2 1.2 - 50 - 20 60 100 20 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 220 nf 470 nf 1000 nf 2200 nf 100 nf t am b 8 5 c, 250 v dc ac v oltage ( v ) 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 220 nf 470 nf 1000 nf 2200 nf 100 nf 8 5 c t am b 100 c, 250 v dc
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 203 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency max. rms voltage as a function of frequency max. rms voltage as a function of frequency max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) 220 nf 470 nf 1000 nf 100 nf t am b 8 5 c, 400 v dc 47 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 220 nf 470 nf 1000 nf 8 5 c < t am b 100 c, 400 v dc 47 nf 100 nf 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) t am b 8 5 c, 630 v dc 220 nf 470 nf 1000 nf 100 nf 47 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 8 5 c < t am b 100 c, 630 v dc 220 nf 470 nf 1000 nf 100 nf 47 nf 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) t am b 8 5 c, 1000 v dc 22 nf 47 nf 100 nf 220 nf 470 nf 10 nf 4.7 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 8 5 c < t am b 100 c, 1000 v dc 4.7 nf 220 nf 470 nf 100 nf 47 nf 22 nf 10 nf
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 204 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency max. rms voltage as a function of frequency max. rms voltage as a function of frequency max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency 2.2 nf t am b 8 5 c, 1400 v dc 47 nf 22 nf 10 nf 4.7 nf 100 nf 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) 8 5 c < t am b 105 c, 1400 v dc 2.2 nf 47 nf 22 nf 10 nf 4.7 nf 100 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) t am b 8 5 c, 1600 v dc 4.7 nf 47 nf 22 nf 10 nf 100 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 8 5 c < t am b 100 c, 1600 v dc 4.7 nf 47 nf 22 nf 10 nf 100 nf 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) t am b 8 5 c, 2000 v dc 47 nf 22 nf 10 nf 4.7 nf 100 nf 2.2 nf 1.0 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 8 5 c < t am b 100 c, 2000 v dc 1.0 nf 47 nf 22 nf 10 nf 4.7 nf 100 nf 2.2 nf
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 205 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 max. rms voltage as a function of frequenc y max. rms voltage as a function of frequency insulation resistance as a func tion of ambient temperature max. allowed component temperature rise ( ? t) as a function of the ambient temperature (t amb ) t am b 8 5 c, 2500 v dc 1.0 nf 47 nf 22 nf 10 nf 4.7 nf 2.2 nf 10 3 10 2 10 1 f (hz) 10 4 10 3 10 5 10 6 10 7 10 8 ac v oltage ( v ) 8 5 c < t am b 105 c, 2500 v dc 47 nf 22 nf 10 nf 4.7 nf 2.2 nf 1.0 nf 10 3 10 2 10 1 f (hz) 10 3 10 2 10 4 10 5 10 6 10 7 ac v oltage ( v ) 10 6 10 5 10 4 0 20 40 60 8 0 100 t am b (c) rc (s) t am b (c) - 50 - 20 60 100 20 0 4 8 12 t (c)
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 206 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 heat conductivity (g) as a function of (origina l) pitch and capacitor body thickness in mw/c tangent of loss angle as a function of frequency (typical curve) 250 v 400 v 630 v 1000 v c ?? 0.091 f, curve 8 c ?? 0.047 f, curve 5 c ?? 0.033 f, curve 4 c ?? 0.01 f, curve 2 c ?? 0.015 f, curve 9 c ?? 0.068 f, curve 6 c ?? 0.068 f, curve 5 c ?? 0.027 f, curve 3 c ?? 0.022 f, curve 10 c ?? 0.1 f, curve 7 c ?? 0.1 f, curve 6 c ?? 0.047 f, curve 4 c ?? 0.027 f, curve 11 c ?? 0.2 f, curve8 c ?? 0.15 f, curve 7 c ?? 0.062 f, curve 5 c ?? 0.033 f, curve 12 c ?? 0.24 f, curve 12 c ?? 0.22 f, curve 11 c ?? 0.075 f, curve 6 c ?? 0.056 f, curve 15 c ?? 0.36 f, curve 13 c ?? 0.27 f, curve 12 c ?? 0.1 f, curve 7 c ?? 0.082 f, curve 16 c ?? 0.43 f, curve 14 c ?? 0.47 f, curve 15 c ?? 0.15 f, curve 8 c ?? 1.2 f, curve 18 c ???? 56 f, curve 16 c ?? 0.68 f, curve 16 c ?? 0.22 f, curve 9 c ?? 1.61 f, curve 19 c ?? 1.1 f, curve 17 c ?? 0.3 f, curve 10 c ?? 2.21 f, curve 20 c ?? 0.39 f, curve 11 c ?? 0.47 f, curve 12 140 v 1600 v 2000 v 2500 v c ?? 0.0047 f, curve 1 c ?? 0.0047 f, curve 3 c ?? 0.0047 f, curve 2 c ?? 0.0047 f, curve 1 c ?? 0.016 f, curve 2 c ?? 0.0091 f, curve 4 c ?? 0.033 f, curve 3 c ?? 0.015 f, curve 2 c ?? 0.033 f, curve 3 c ?? 0.068 f, curve 5 c ?? 0.1 f, curve 4 c ?? 0.056 f, curve 3 c ?? 0.051 f, curve 4 c ?? 0.01 f, curve 6 c ?? 0.068 f, curve 5 c ?? 0.15 f, curve 7 c ?? 0.082 f, curve 6 c ?? 0.1 f, curve 7 w max. (mm) heat conductivity (mw/c) pitch 15 mm pitch 22.5 mm pitch 27.5 mm 4.0 - - - 5.0 10 - - 6.0 11 19 - 7.0 12 21 - 8.5 16 25 - 10.0 18 28 - 11.0 - - 36 13.0 - - 42 15.0 - - 48 18.0 - - 57 dissipation factor (x 10 -4 ) 10 3 10 2 10 0 10 1 (hz) 10 3 10 2 10 4 10 5 10 6 20 19 1 8 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 207 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 power dissipation and maximum component temperature rise the power dissipation must be limited in order not to exceed the maximum allowed component tem perature rise as a function of the free air ambient temperature. the power dissipation can be calculated according type detail specification ?hqn-384-01/101: technical information film capacitors?. the component temperature rise ( ? t) can be measured (see section ?measuring the component temperature? for more details) or calculated by ? t = p/g: ?? t = component temperature rise (c) ? p = power dissipation of the component (mw) ? g = heat conductivity of the component (mw/c) measuring the component temperature a thermocouple must be attached to the capacitor body as in: the temperature is m easured in unloaded (t amb ) and maximum loaded condition (t c ). the temperature rise is given by ? t = t c - t amb . to avoid radiation or convection, the capacitor should be tested in a wind-free box. application note and limiting conditions these capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as descri bed hereunder. these mains applications are st rictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. to select the capacitor for a certain application, the following conditions must be checked: 1. the peak voltage (u p ) shall not be greater than the rated dc voltage (u rdc ) 2. the peak-to-peak voltage (u p-p ) shall not be greater than 2 ? 2 x u rac to avoid the ionisation inception level 3. the voltage pulse slope (du/dt) shall no t exceed the rated voltage pulse slope in an rc-circuit at rated voltage and without ringing. if the pulse voltage is lower than the rated dc vo ltage, the rated voltage pulse slope may be multiplied by u rdc and divided by the applied voltage. for all other pulses following equation must be fulfilled: t is the pulse duration. 4. the maximum component surface temperat ure rise must be lower than the limits (see graph max. allowed component temperature rise). 5. since in circuits used at voltages over 280 v peak-to-peak the risk for an intrinsically active flammability after a capacito r breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: ?heat conductivity? thermoco u ple 2 du dt ------- - ?? ?? 2 0 t ? dt u rdc du dt ------- - ?? ?? rated ? ? ? ?
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 208 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 6. when using these capacitors as across-the-line capacitor in t he input filter for mains applicatio ns or as series connected wi th an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). voltage conditions for 6 above example c = 4 nf - 1600 v used for the voltage signal shown in next drawing. u p-p = 1000 v; u p = 900 v; t 1 = 12 s; t 2 = 64 s; t 3 = 4 s the ambient temperature is 80 c. in case of failure, the oscillation is blocked. checking conditions: 1. the peak voltage u p = 900 v is lower than 1600 vdc 2. the peak-to-peak voltage 1000 v is lower than 2 ? 2 x 550 vac = 1600 u p-p 3. the voltage pulse slope (du/dt) = 1000 v/4 s = 250 v/s this is lower than 8000 v/s (see specific reference data for each version) 4. the dissipated power is 35 mw as calculated with fourier terms and typical tgd. the temperature rise for w max. = 6.0 mm and pitch = 15 mm will be 35 mw/11 mw/c = 3.2 c this is lower than 10 c temperature rise at 80 c, according graph. 5. oscillation is blocked 6. not applicable voltage signal allowed voltages t amb ? 85 c 85 c < t amb ? 105 c maximum continuous rms voltage u rac u rac maximum temperature rms-overvoltage (< 24 h) 1.25 x u rac 1.25 x u rac maximum peak voltage (v o-p ) (< 2 s) 1.6 x u rdc 1.1 x u rdc v oltage u p t 3 t 1 t 2 u p-p time
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 209 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 inspection requirements general notes: sub-clause numbers of tests and performanc e requirements refer to the ?sectional sp ecification, public ation iec 60384-17 and specific reference data?. group c inspection requirements sub-clause number and test conditions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (detail) as specified in chapters ?general data? of this specification 4.3.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 100 khz or for c > 1 f at 10 khz 4.3 robustness of terminations tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 no visible damage 4.4 resistance to soldering heat method: 1a solder bath: 280 c 5 c duration: 10 s 4.14 component solvent resistance isopr opylalcohol at room temperature method: 2 immersion time: 5 min 0.5 min recovery time: min. 1 h, max. 2 h 4.4.2 final measurements visual examination no visible damage legible marking capacitance ?? c/c| ? 1 % of the value measured initially tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.3.1 sub-group c1b other part of sample of sub-group c1 4.6.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 100 khz or for c > 1 f at 10 khz 4.15 solvent resistance of the marking i sopropylalcohol at room temperature method: 1 rubbing material: cotton wool no visible damage legible marking 4.6 rapid change of temperature immersion time: 5.0 min 0.5 min ? a = - 55 c ? b = + 105 c 5 cycles duration t = 30 min 4.7 vibration visual examination mounting: see section ?mounting? for more information procedure b4 frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h no visible damage
mmkp 383 vishay bccomponents ac and pulse double metallized polypropylene film capacitors mmkp radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 28124 210 revision: 19-mar-13 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 sub-group c1b other part of sample of sub-group c1 4.7.2 final inspection visual examination no visible damage 4.9 shock mounting: see section ?mounting? for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms 4.9.3 final measurements visual examination no visible damage capacitance ?? c/c| ? 1 % of the value measured in 4.6.1 tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.6.1 insulation resistance as specif ied in section ?insulation resistance? of this specification sub-group c1 combined sample of specimens of sub-groups c1a and c1b 4.10 climatic sequence 4.10.2 dry heat temperature: + 105 c duration: 16 h 4.10.3 damp heat cyclic test db, first cycle 4.10.4 cold temperature: - 55 c duration: 2 h 4.10.6 damp heat cyclic test db, remaining cycles 4.10.6.2 final measurements voltage proof = u rdc for 1 min within 15 min after removal from testchamber no breakdown of flash-over visual examination no visible damage legible marking capacitance for original pitch = 22.5 mm and 27.5 mm: ?? c/c| ? 3 % of the value measured in 4.4.2 or 4.9.3 tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.3.1 or 4.6.1 insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c2 4.11 damp heat steady state 56 days, 40 c, 90 % to 95 % rh no load 4.11.1 initial measurements capacitance tangent of loss angle at 1 khz 4.11.3 final measurements voltage proof = u rdc for 1 min within 15 min after removal from testchamber no breakdown of flash-over visual examination no visible damage legible marking capacitance | ? c/c| ? 1 % of the value measured in 4.11.1. tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.11.1 insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-clause number and test conditions performance requirements
document number: 28124 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 19-mar-13 211 mmkp 383 ac and pulse double me tallized polypropylene film capacitors mmkp radial potted type vishay bccomponents this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 not recommended for new design, use new mmkp383 sub-group c3a 4.12.1 endurance test at 50 hz alternating voltage duration: 2000 h 1.25 x u rdc at 105 c 4.12.1.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 100 khz or for c > 1 f at 10 khz 4.12.1.3 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % compared to values measured in 4.12.1.1 tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.12.1.1 insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-group c4 4.2.6 temperature charcteristics initial measurements intermediate measurements final measurements capacitance capacitance at - 55 c capacitance at 20 c capacitance at + 105 c capacitance insulation resistance for - 55 c to + 20 c: + 1 % ?? | ? c/c| ? 3.75 % or for 20 c to 105 c: - 6 % ?? | ? c/c| ? 0 % as specified in section ?capacitance? of this specification. as specified in section ?insulation resistance? of this specification 4.13 charge and discharge 10 000 cycles charged to u rdc discharge resistance: 4.13.1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 100 khz or for c > 1 f at 10 khz 4.13.3 final measurements capacitance | ? c/c| ? 1 % compared to values measured in 4.13.1 tangent of loss angle increase of tan ? ? 0.0005 for: c ? 100 nf or ? 0.001 for: 100 nf < c ? 470 nf or ? 0.0015 for: c ? 470 nf compared to values measured in 4.13.1 insulation resistance ? 50 % of values specified in section ?insulation resistance? of this specification sub-clause number and test conditions performance requirements r u rdc 5 x c x 2.5 x du dt ? ?? ------------------------------------------------------------- - =
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of BFC238330224

	To Download BFC238330224 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .